This dataModule features analog input at 12-bit resolution on 16 single-ended input channels. A conversion time of 25’s allows for a sampling rate of up to 40kHz. Analog input gain is resistor-configurable and three possible sampling ranges are available: ±5, ±10, or +10V. Digital I/O is also available on-board via 16 bits of byte-programmable I/O with pull-up and pull-down resistors on the lines. The digital I/O lines can supply a drive current of ±2.5mA. In addition, three 16-bit timer/counters can be used with the on-board 8MHz clock. The dataModule was designed with durability in mind and has an operating temperature of -40° to +85°C. This allows it to be used in the harshest of environments.
- 16 single-ended analog inputs
- 12-bit resolution
- 25
- ±5, ±10, +10V input ranges
- Resistor-configurable gain
- Software triggering
- 16 bits of byte-programmable digital I/O
- Pull-up and pull-down resistors for digital lines
- ±2.5mA digital output drive current
- Three 16-bit timer/counters based off on-board 8MHz clock
- Selectable interrupt source
- Operating Temperature: -40° to +85°C
- Optional rugged IDAN® enclosure system
Leave a Reply
You must be logged in to post a comment.