•    AMD Geode LX800 processor; 500 MHz; from long-term manufacturing program
•    PC/104 and PC/104-Plus expansion modules support; 16-bit ISA and 32-bit PCI buses
•    256 MB soldered DDR SDRAM
•    Supported resolutions up to 1920×1440; VGA and LVDS interfaces; LCD panels support
•    Soldered NAND flash disk 1 GB
•    CompactFlash Type I/II socket
•    Two 10/100-BaseT Fast Ethernet ports
•    Two USB 2.0; four COM ports (two isolated RS-422/485 ports)
•    Protective coating (option)
•    Shocks/vibration: 50G/10G (IEC 68-2-27-87; IEC 68-2-6-82)
•    Operating temperature range: –40°C to +85°C (IEC 68-2-14-84)

 

CPC304 is a PC/104-Plus single board computer for embedded applications. It is designed for use in mission critical on-board systems requiring low power consumption and wide operating temperature range. CPC304 architecture is based on AMD Geode LX800 CPU and AMD CS5536 I/O companion.

CPC304 provides full support for PC/104 and PC/104-Plus expansion modules and data exchange via both 16-bit ISA and 32-bit PCI buses.

All key components including CPU, chipset, memory, and periphery controllers are soldered on-board providing excellent vibration stability and increased efficiency of protective conformal coating.

CPC304 offers wide variety of data display capabilities. System developers can take advantage of simultaneous operation of standard VGA interface with resolution up to 1920×1440, 24-bit LVDS interface, and 18-bit interface for TFT or DSTN LCD panels connection.

Data storage subsystem is based on single-channel IDE controller, that is able to drive any two devices out of a number of selected in BIOS Setup and available for connection IDE devices: two external hard drives connected via on-board connectors, CompactFlash card, or soldered on-board 1 GB flash disk.

For data exchange, CPC304 uses two independent Fast Ethernet ports, four COM ports, two USB 2.0 ports, and eight programmable discrete input/output lines.

System control and management capabilities of CPC304 include two watchdog timers, opto-isolated remote reset input, external signal system wake-up controller, reserved BIOS, and possibility to save system configuration and emergency parameters in FRAM chip.

CPC304 is manufactured in two versions: CPC304-01, full function version, and CPC304-02, “light-weight” version without LVDS interface and on-board 1 GB NAND flash disk, with one Fast Ethernet channel and three COM ports.

CPC304 is designed for operation within industrial temperature range from -40°C to +85°C.

CPC304 supports wide range of operating systems MS DOS, QNX, Windows XPE, CE5, RTOS32 and Linux.

  • AMD Geode LX800 processor; 500 MHz
  • PC/104 and PC/104-Plus expansion modules support
  • 16-bit ISA and 32-bit PCI buses
  • 256 MB soldered DDR SDRAM
  • Supported resolutions up to 1920x1440
  • VGA and LVDS interfaces, LCD panels support
  • Soldered NAND flash disk 1 GB
  • CompactFlash Type I/II socket
  • Two 10/100-BaseT Fast Ethernet ports
  • Two USB 2.0, four COM ports (two isolated RS-232/485 ports)
  • Industrial operating temperature range: -40°C to +85°C

For more than 15 years Fastwel has been one of the leading companies developing and manufacturing rugged Single Board Computers for mission-critical applications in transport, military and defence, security and telecom. We deliver CPU modules for aerospace equipment, industrial automation and process control systems. Besides standard products manufacturing, Fastwel offers a full range of OEM and ODM services. It has always been Fastwel primary goal to provide world class, highly reliable embedded computer solutions for mission-critical applications, which can serve long-term demands of our customers and secure their efforts and time. We deliver a wide selection of CPU modules designed in CompactPCI, PC/104, VME, 3,5, EPIC form factors, as well as Industrial Motherboards and Computer-on-Modules. Most of these products operate at the temperature range from -40C to +85C and withstand high level of shock, vibration (50G/5G) and humidity (up to 95% noncondensing). Our manufacturing is ISO 9001:2000 TUV quality management system certified and corresponds to the world standards and trends. Fastwel technological level allows to produce RoHS compliant equipment and all our boards have a CE certification. The compatibility of Fastwel products with modern operating systems and equipment enables the company to perform successfully on the demanding technological market.



Leave a Reply