PCIBPC104pET adapter / carrier converter card provides the ability to install 1-4 active PC104p or PCI-104 cards into a standard PCI slot. PCIBPC104pET has a PC104p and PCI-104 compatible stack position mounted to a universal voltage shorter than 1/2 length PCI card. The PC104p position is stackable with all 4 active positions usable. Additional non-PCI cards can also be added. PCI power is routed to the PC104p stack with heavy planes allowing enough current to cover the PC104p specification. Interrupts are routed to the PCI connector. Request and Grant lines are handled by the bridge locally and back to the host on the PCI bus to allow for bus master operation. The design is robust with extended temperature components, impedance controlled, PCI compliant routing, heavy power planes with decoupling for the PC104p voltages, and more. With the PCIBPC104pET (PCI Bridge PC104p/PCI-104 Extended Temperature) all you have to do is install your PC104p onto the adapter, and plug into the PCI slot. PCIBPC104pET is compatible with 32 bit PCI slots. The PC104p positions can be programmed to use 3.3 or 5V for VIO. The bridge provides plug and play operation.
- 1/2 length Universal Voltage PCI card
- Up to 4 active PC104p or PCI-104 modules
- Bus Masters supported
- Programmable Interrupts
- Extended Temperature
Leave a Reply
You must be logged in to post a comment.