Blog Archives

PCIBPC104pET

February 1, 2015 Dynamic Engineering — No Comments

PCIBPC104pET adapter / carrier converter card provides the ability to install 1-4 active PC104p or PCI-104 cards into a standard PCI slot. PCIBPC104pET has a PC104p and PCI-104 compatible stack position mounted to a universal voltage shorter than 1/2 length PCI card. The PC104p position is stackable with all 4 active positions usable. Additional non-PCI cards can also be added. PCI power is routed to the PC104p stack with heavy planes allowing enough current to cover the PC104p specification. Interrupts are routed to the PCI connector. Request and Grant lines are handled by the bridge locally and back to the host on the PCI bus to allow for bus master operation. The design is robust with extended temperature components, impedance controlled, PCI compliant routing, heavy power planes with decoupling for the PC104p voltages, and more. With the PCIBPC104pET (PCI Bridge PC104p/PCI-104 Extended Temperature) all you have to do is install your PC104p onto the adapter, and plug into the PCI slot. PCIBPC104pET is compatible with 32 bit PCI slots. The PC104p positions can be programmed to use 3.3 or 5V for VIO. The bridge provides plug and play operation.

PCI2PC104p

February 1, 2015 Dynamic Engineering — No Comments

Install a PC104p or PCI-104 device into a PCI slot. Option for Test or production orientation. Test version comes with test points on PCI signals. All clocks, IDSEL, RQST, GNT and Interrupt lines connected to allow stack positions to be tested.

PCI-PC/104-Plus Adapter

February 1, 2015 PEAK System Technik GmbH — No Comments

This adapter can be used to fit and operate PC/104-Plus cards in PCs with PCI slots. Multiple cards can be stacked together on a single adapter.

PCI to PC/104-Plus and PCI-104 Interface Boards

February 1, 2015 Douglas ElectronicsInc. — No Comments

A wide variety of products for connecting PCI boards to the PC/104 environment are provided. Interfaces with 1-4 PCI boards, where the PCI boards are either parallel or vertical to the PC/104 boards, and choices of having the PCI boards above or below the PC/104 stacks are available.

PC104pPWR28

February 1, 2015 Dynamic Engineering — No Comments

“28V” [wide input range] Power Supply for PC104, PC104p, PCI-104 stacks. regulated – 1A per pin: +12, -12,-5V and 10A: +5, 3.3 supplied. 5V or 12V Fan power option for air cooled chassis. Self healing fuses. Available as std. or ROHS. Air or conduction cooled. Selection for VIO reference. Available as stack-through or non-stack through. Also available as a 12V input supply.

PC104pSpaceWire

February 1, 2015 Dynamic Engineering — No Comments

Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-ST-50-12C specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.

4 SpaceWire ports on a PC104p / PCI-104 form factor. Programmable link rates up to 200 MHz per port. Independent ports with DMA support. Windows, Linux drivers and user reference applications free with purchase.

Options for ROHS, additional memory, conformal coating.

PC104pBaseBoard

February 1, 2015 Dynamic Engineering — No Comments

The BaseBoard acts as a motherboard for a PC104p stack with a power supply position [PC104] and PC104p / PCI-104 module stack. The BaseBoard has the “kitchen sink” IO acting like an extra module.

Consider this design as an example of custom designs we can do for you.

35 Optocoupled Inputs, 37 Optocoupled Outputs, 2 UART – RS-485 ports, 2 ARINC 429 – TX/RX, 4 ADC Ports, and 4 DAC Ports comprize the onboard feature set of the BaseBoard design.

Original Client used this design for an airborne application. Conformal coated.

PC104pChassis

February 1, 2015 Dynamic Engineering — No Comments

Rugged, cost effective chassis for PC104, PC104p, PCI-104 and mixed modules. 1-N slot lengths available. Conduction and Air cooled versions. In use for land, sea and air applications. Built-in thermal plate and heat sink. Internal frame with vibration isolation.

End Plates are machined with a gasket for water tight operation.

Aluminum construction with black anodized finish. Dimensions available on webpage. Customized end plates for client connector requirements available.

PC104p2PMC

February 1, 2015 Dynamic Engineering — No Comments

Adapter to allow use of PMC devices in PC104p or PCI-104 stack.

PC104p-BiSerial-III

February 1, 2015 Dynamic Engineering — No Comments

The BiSerial features large internal “BLOCK RAM” which can be used for FIFO or Dual Port RAM. The Spartan III® contains the PCI interface with DMA and the state-machines for your design. If deeper FIFO’s are required; an additional 128Kx32 x2 are available. 16 – 40 MHz 485 and/or LVDS buffers with programmable termination and direction can be configured to your systems requirements.

There are 4 DAC, and 4 ADC channels which can be populated with 200 KHz. 16 bit devices.

Eight TTL IO are provided for flexibility, and to remove the need for an additional card when only a few bits are needed. The state-machines can be coupled to the TTL IO or they can be used as a separate parallel port or other function.